Toshiba TDP-S3 Service Manual page 101

Part Name Part
Number
Gap pad, rear 329-0301-xx All
diode
Ground clip 330-0724-xx All
I/O EMI shield 330-0703-xx All
I/O EMI shield 329-0343-xx TDP-MT5
gasket
Keypad 526-0099-xx All
Lamp blower 526-0078-xx All
Lamp blower heat 329-0337-xx All
shield
Lamp door 505-0978-xx TDP-S3/T3
Lamp door 505-1196-xx
Lamp fan 526-0079-xx All
Lamp fan heat 329-0306-xx All
shield
Lamp module SP-Lamp-
LP5E
Lens cap 505-0964-xx All
Optical engine 505-1173-xx TDP-MT5
Optical engine 505-1180-xx TDP-T3
Optical engine 505-1181-xx TDP-S3
Power supply 510-1532-xx All
Power supply fan 526-0098-xx All
Power supply fuse 749-0026-xx All
Power supply 329-0268-xx TDP-S3/T3
insulator
Power supply 329-0321-xx TDP-MT5
insulator
TDP-S3/TDP-T3/TDP-MT5 Service Manual
Projector Notes
Adheres to the diode heat sink bracket (330-0742-xx).
Fastens to the chassis. Grounds to the optical engine.
Requires lamp blower heat shield (329-0337-xx). Also
included with new optical engine.
Required for new lamp blower.
TDP-MT5
Requires a lamp fan heat shield (329-0306-xx). Also
included with new optical engine. Identical to the front
fan.
Required for new lamp fan.
All
Requires focus ring adhesive (329-0285-xx)
Requires focus ring adhesive (329-0285-xx)
Requires focus ring adhesive (329-0285-xx)
Also comes with new power supply.
Fits between the power supply and chassis.
Fits between the power supply and chassis.
101