Toshiba TDP-S3 Service Manual page 38

6 Lift the other side of the bezel up to loosen the chassis. Then grasp the front of the chassis and
lift the chassis and attached power supply out of the projector.
Below is the chassis and power supply as it looks when removed from the bottom case.
7 Do one of the following:
If you removed the chassis and power supply to access another part, set it aside and select the
part you want to remove in the dropdown menu at the top of the page.
—Or—
Click the part you want to remove from the list below:
Power supply fan and interlock switch cable (see page 52)
Power supply fuse (see page 54)
Power supply (see page 48)
Rear bezel (see page 40)
TDP-S3/TDP-T3/TDP-MT5 Service Manual 38