Advertisement
KS-FX772R
Removing the pinch arm (F) assembly
1.
Remove the polywasher and pull out the pinch arm
(F) assembly.
2.
Remove the compulsion spring.
Removing the pinch arm (R) assembly
1.
Remove the polywasher and pull out the pinch arm
(R) assembly.
Removing the slide chassis assembly
REFERENCE:
It is not necessary to remove the head
and the tape guide.
1.
Move the slide chassis assembly in the direction of
the arrow to release the two joints l and remove from
the main chassis.
2.
Remove the rack link.
CAUTION:
When reassembling, first reattach the rack
link, and next fit the boss m and hook n of
the slide chassis assembly to the hole of
the main chassis, and engage the two joints
l.
Joint l
Slide chassis assembly
1-10
(See Fig.11 and 12)
(See Fig.11 and 13)
(See Fig.14 and 15)
Joint l
Fig.14
Polywasher
Pinch arm
(R) assembly
Polywasher
Compulsion spring
Fig.12
Boss m
Rack link
Pinch arm
Polywasher
(F) assembly
Fig.11
Pinch arm (F) assembly
Pinch arm
(R) assembly
Polywasher
Fig.13
Head
Tape guide
Hook n
Fig.15
Advertisement
