Advertisement
Removing the side bracket assembly
1.
Remove the screw A
assembly.
2.
Detach the front side of the side bracket assembly
upward and pull out forward to release the joint i and
j in the rear.
CAUTION:
When reassembling, make sure that the
boss k of the main chassis is set in the
notch of the load rack under the side
bracket assembly. Do not reattach the
load rack on the boss k.
CAUTION:
After reattaching the side bracket
assembly, confirm operation.
(See Fig.8 to 10)
attaching the side bracket
Load rack
Side bracket assembly
A
Side bracket assembly
Fig.8
Side bracket assembly
Load rack
Boss k
Boss k
Fig.9
Fig.10
KS-FX772R
Joint i
Joint j
Joint i
Joint j
1-9
Advertisement
