Advertisement
Removing the gear base assembly / take
up gear / reflector gear (See Fig.32 to 34)
1.
Push in the pin d' of the gear base assembly on the
upper side of the body and move the reflector gear
toward the bottom, then pull out.
2.
Remove the polywasher on the bottom and pull out
the take up gear.
3.
Move the gear base assembly in the direction of the
arrow to release it from the two slots e' of the main
chassis.
REFERENCE:
The parts are damaged when removed.
Please replace with new ones.
Removing the reel driver / reel spindle
1.
Draw out the reel driver from the shaft on the main
chassis and remove the reel driver spring and the
reel spindle respectively.
CAUTION:
The reel driver is damaged when
removed. Please replace with a new
one.
Gear base assembly
Pin d'
(See Fig.34)
Reel driver
Reel driver spring
Reel spindle
Main chassis
Slot e'
Fig.32
Take up gear
Polywasher
Reflector gear
Fig.33
Reel driver
Polywasher
Reflector gear
Fig.34
KS-FX772R
Slot e'
Reel driver spring
Reel spindle
Gear base assembly
Slots e'
Take up gear
1-15
Advertisement
