JVC KS-FX772R Service Manual page 5

KS-FX772R
Removing the control switch board
Prior to performing the following procedure, remove
the front panel assembly.
1. Remove the four screws G attaching the rear cover
on the back of the front panel assembly.
2. Unjoint the eleven joints c with the front panel and
the rear cover.
3. Remove the control switch board on the back of the
front panel.
1-6
(See Fig.10 ~ 12)
Joint c
G
G Rear cover
Fig.10
Joint c
Front panel
Rear cover
Fig.11
Front panel
Fig.12
G
G
Joint c
Joint c
Control switch board