JVC KS-FX772R Service Manual page 4

Removing the main board
Prior to performing the following procedure, remove
the front panel assembly, the front chassis assembly,
the heat sink and the bottom cover.
1. Remove the screw B, the three screws C and the
two screws D attaching the rear bracket on the back
of the body. Remove the rear panel.
2. Remove the two screws E attaching the main board
on the bottom of the body. Disconnect connector
CN701 on the main board in the direction of the
arrow.
Removing the cassette mechanism section
Prior to performing the following procedure, remove
the front panel assembly, the front chassis assembly,
the heat sink, the bottom cover and the main board.
1. Remove the four screws F attaching the cassette
mechanism section on the back of the top chassis.
(See Fig.7 , 8)
D
E
(See Fig.9)
Rear panel
C
Fig.7
Main board
CN701
Fig.8
Cassette mechanism section
F
F
F
Fig.9
KS-FX772R
C
B
D
E
F
Top chassis
1-5