JVC KS-FX772R Service Manual page 3

KS-FX772R
Removing the heat sink (See Fig.4)
1. Remove the three screws A on the left side of the
body.
Removing the bottom cover
Prior to performing the following procedure, remove
the front panel assembly, the front chassis assembly
and the heat sink.
1.
Turn over the body and unjoint the five joints b with
the bottom cover and the body using a screwdriver.
1-4
(See Fig.5 , 6)
Heat sink
A
Fig.4
Joint b
Bottom cover
Joint b
Rear panel
Fig.5
Bottom cover
Joint b
Rear panel
Fig.6
A
Joint b
Joint b
Joint b