Sun Microsystems StorEdge T3+ Installation And Configuration Manual page 5

Single Host With Two Hubs and Four Controller Units Configured as Two
Partner Groups 35
Single Host With Two Hubs and Eight Controller Units Configured as Four
Partner Groups 38
Dual Hosts With Two Hubs and Four Controller Units 40
Dual Hosts With Two Hubs and Eight Controller Units 42
Dual Hosts With Two Hubs and Four Controller Units Configured as Two
Partner Groups 44
Dual Hosts With Two Hubs and Eight Controller Units Configured as Four
Partner Groups 46
Switch Host Connection 48
Dual Hosts With Two Switches and Two Controller Units 48
Dual Hosts With Two Switches and Eight Controller Units 50
5. Preparing to Install 53
Preparing for the Installation 54
To Inspect the Array 55
To Edit the Host Files 57
To Install Required Patches 59
Installation Checklist 61
6. Array Installation 63
To Install the Array 64
To Connect the Cables 65
To Power On and Verify the Hardware Configuration 70
To Establish a Network Connection 72
To Verify the Firmware Level and Configuration 75
Installing the Administration Tools 81
Defining and Mounting Volumes 81
To Configure the Workgroup
To Configure the Enterprise
83
85
Contents v