Sun Microsystems StorEdge A1000 Installation Manual
Hide thumbs
Also See for StorEdge A1000:
- Installation, operation and service manual (60 pages) ,
- Installation manual (8 pages) ,
- Operation and service manual (54 pages)
Advertisement
Quick Links
Sun StorEdge™ A1000 and D1000
Rackmount Installation Guide
For the Sun™ Rack
Sun Microsystems, Inc.
4150 Network Circle
Santa Clara, CA 95054 U.S.A.
650-960-1300
Part No. 816-7772-10
November 2002, Revision A
Send comments about this document to: docfeedback@sun.com
Advertisement
Related Manuals for Sun Microsystems StorEdge A1000
Summary of Contents for Sun Microsystems StorEdge A1000
- Page 1 Sun StorEdge™ A1000 and D1000 Rackmount Installation Guide For the Sun™ Rack Sun Microsystems, Inc. 4150 Network Circle Santa Clara, CA 95054 U.S.A. 650-960-1300 Part No. 816-7772-10 November 2002, Revision A Send comments about this document to: docfeedback@sun.com...
- Page 2 LOOK GUIs and otherwise comply with Sun’s written license agreements. Use, duplication, or disclosure by the U.S. Government is subject to restrictions set forth in the Sun Microsystems, Inc. license agreements and as provided in DFARS 227.7202-1(a) and 227.7202-3(a) (1995), DFARS 252.227-7013(c)(1)(ii) (Oct. 1998), FAR 12.212(a) (1995), FAR 52.227-19, or FAR 52.227-14 (ALT III), as applicable.
-
Page 3: Kit Contents
Sun StorEdge A1000 and D1000 Rackmount Installation This document contains the following sections: Kit Contents—page 1 Installing the Mounting Tray on the Chassis—page 2 Installing the Mounting Brackets—page 4 Installing the Chassis in the Cabinet—page 5 Kit Contents The kit supplied with a tray contains:... - Page 4 1. With the aid of an assistant, invert the chassis with the front facing you ( FIGURE 1 2. Remove the feet. Discard the feet and screws. They are not reused. Removing the Feet FIGURE 1 Sun StorEdge A1000 and D1000 Rackmount Installation Guide • November 2002...
- Page 5 5. When all screws are started, tighten them. 6. With the aid of an assistant, restore the chassis to the upright position with the front of the chassis facing you. 7. Go to “Installing the Mounting Brackets” on page 4. Sun StorEdge A1000 and D1000 Rackmount Installation...
-
Page 6: Installing The Mounting Brackets
FIGURE 3 3. Attach the brackets to the outsides of the rack mounting rails using 4 M6 screws on each side. 4. Tighten the 10-32 screws on the brackets. Sun StorEdge A1000 and D1000 Rackmount Installation Guide • November 2002... - Page 7 2. Line up the mounting tray with the mounting brackets in the cabinet ( FIGURE 4 Aligning the Mounting Tray With the Mounting Brackets FIGURE 4 3. Rest the chassis on the mounting brackets, then slide the chassis in. Sun StorEdge A1000 and D1000 Rackmount Installation...
- Page 8 5. Connect the power cables and SCSI cables. For maximum power redundancy, connect the power cables to different power sequencers. Refer to the instructions that came with your cabinet. Sun StorEdge A1000 and D1000 Rackmount Installation Guide • November 2002...