Holding Time; New Access Number - B&C CL 7685 Operator's Manual

B&C Electronics

7.24 HOLDING TIME

Active keys: [MODE] - [/\] [\/] - [ENT]

7.25 NEW ACCESS NUMBER

Active keys: [MODE] - [/\] [\/] - [ENT]
Two possible alternative A or B.
A. "NO"
B. "YES"
Active keys: [MODE] - [/\] [\/] - [ENT]
The instrument ask the operator to insert again the new access number.
Active keys: [MODE] - [/\] [\/] - [ENT]
The double insertion of the new code assure the memorization of the right code.
As soon as the new code is memorized the message "UPDATE" will appear.
Should the operator insert two different numbers, the instrument will not modify the
access number and the message "NO UPDATE" will be shown.
[ENT] press several time the key to verify the selected parameters selected before leaving
the Configuration routine.
Operator's Manual - Rev. C - 05/05
|HOLDING T: 3.0'|
|Change Nr.: NO
NO : access number changing not required
YES: access number changing required
The unit will go back to the Configuration Display; the operator may
verify the parameter setting before leaving the Configuration sequences
which is now protected by access number.
The unit is now ready to the new access number selection.
|New Nr.:
|Confirm Nr.:
_
_
| |Change Nr.: YES
_
0 |
_
0 |
CL 7685
_
|
- –
39