Table of Contents
Advertisement
B&C Electronics
This mode of calibration is useful when the concentration of the sample is stable and the value is
known.
The instrument shows for a few seconds the following message:
Then it will show the measuring value:
[MODE]
[/\]+[\/]+[ENT] press the three keys to turn to factory calibration
2A.
[/\]+[\/]
3A.
[ENT]
[ENT]
This mode of calibration is useful when the value of Chlorine (ClO
an immediate test is not available.
The instrument shows for a few seconds the following message:
Operator's Manual - Rev. C - 05/05
IMMEDIATE CALIBRATION
|IMMEDIATE CAL
|CAL CL: 0.80 ppm|
CL 0.80: actual value
to stop the procedure and to go back to D1
to set the value
- to confirm the selected value
- to go back to D1
MESSAGE
|
UPDATE
Error messages
|SENS > 250.0%
|SENS <
12.5%
The above messages will last for 5 minutes
to acknowledge the error messages
|
NO UPDATE
POSTPONED CALIBRATION
|SAMPLE VAL. REC.|
_
|
_
(ClO
-O
)
2
3
FUNCTION
_
the calibration is accepted
|
_
Sensitivity > 250.0%
|
_
Sensitivity < 12.5%
|
_
calibration is not accepted
|
/O
) on water is unstable or when
2
3
_
CL 7685
-
–
24
Hide quick links:
Advertisement
Table of Contents
