B&C CL 7685 Operator's Manual page 31

B&C Electronics
Automatic cleaning function (AUTO CLEAN)
[MODE]
[/\]+[\/]+[ENT] press the 3 keys to set to zero the time to the next cleaning cycle
3B. [ENT]
[MODE]
4B. [/\] [\/]
5B. [ENT]
[MODE]
6B. [/\] [\/]
7B. [ENT]
IMPORTANT NOTE: during the calibration procedure the microcomputer turn the unit to the main
display if no keys have been pressed within 5 minutes.
Operator's Manual - Rev. C - 05/05
|NEXT CYCLE:24.0h|
24.0 h: time to the next cleaning cycle
to stop the procedure and to go back to D6
to turn the unit to the WAITING/START auto clean
|CLEAN C.:WAITING|
WAITING: the unit is awaiting to start a new Clean Cycle
to stop the procedure and to go back to D6
to select START or WAITING
to confirm selection
- If START is selected the unit go back to D0 and a manual Clean Cycle
starts without modify the time of the automatic Clean Cycle.
- If WAITING is selected the unit turn to the period of repetition
calibration (see steps 6B and 7B).
|REPETITION:24.0h|
24.0 h: period of repetition
to stop the procedure and to go back to D6
to select the time value
to confirm and to go back to D6
_
_
(START)
_
CL 7685
- –
31