Care And Maintenance; When "Filter Maintenance Indicator Light" Turns On - Sharp KC-JG20A Operation Manual

CARE AND MAINTENANCE

When "Filter Maintenance Indicator Light" turns on

Indicates the time to clean the Water Tank, Humidifying Filter, Humidifying Tray, Back Panel and Sensor unit.
Humidifying Filter
Humidifying Tray
Knack of detachment
Humidifying Tray
Hold it up slightly
• Drain water from the
Humidifying Tray periodically.
Caution
(Mold or saprophytic bacteria
could propagate resulting in
smelly odor)
E-16
Back
Sensor Unit
Back Panel
Water Tank
Pull out
Unplug
2
1
• See the knack of detachment
(At the lower left of this page)
Gray side
Beep
Press for
at least
3 seconds
• After cleaning, make sure to press the OFF timer button for at
least 3 seconds to reset it even if the Filter Maintenance Indicator
Light has not been on.
You will be notified of the next maintenance time about a month later (if the
unit is operated 24 hours a day)
WARNING
Be sure to power OFF
and unplug the unit
before maintenance.
Pull out the plug
[Otherwise, electric shock and/or injury could result]
When the unit operates for 24 hours
3
Slightly lift up the
Humidifying Tray and then
pull it out. Clean the
Humidifying Filter and the
Humidifying Tray.
• Be careful, do not spill out water
from the Humidifying Tray.
Reinstall the Humidifying
Filter, Humidifying Tray, and
Water Tank back to the unit.
• Be sure to mount the
Humidifying Filter with the
correct side facing front.
(The gray side should face
the front)
Clean the Back Panel.
Detach the Back panel and
then clean the Sensor Unit.
Reinstall the Back Panel,
insert the plug into the socket,
and press the OFF timer
button for 3 seconds or more.
(The Filter Maintenance
Indicator Light turns off)