Table of Contents
Advertisement
INSTALLATION GUIDE
Connection of AC adapter and installation of main unit
1
Insert the DC plug of AC
adapter in the DC jack of
the main unit.
2
Insert the AC plug of AC
adapter in the outlet.
3
Place the main unit at the level place in the room.
Precautions on installation
• .e sure to place the product on a stable surface.
• Do not block the suction port and the air outlet.
• If the Plasmacluster Ion Generator causes interference to radio or television
reception, try to correct the interference by one or more of the following measures:
• Adjust or relocate the receiving antenna.
• Increase the distance between the product and radio�TV receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio�TV technician for help.
HOW TO SET UP HELMET ON PCI UNIT
• Be sure to turn up the shield to have circulation of air.
• Wipe helmet of any water droplets if any.
< Full-face type>
DC jack
DC plug
<Open-face type>
E-6
AC plug
<Half type>
AC adapter
Advertisement
Table of Contents
