LED Indicators and Switches
System Identification Switch
The system identification switch (SW2) is a three-position switch that identifies the
operational configuration of the server. This switch is set to the correct configuration for the
server by default. Table 4-10 shows the switch settings and positions.
Table 4-10: System Identification Switch (SW2)
Position
1
2
3
4-16
CAUTION: Do not alter the default setting for the server. Doing so causes improper server
operation.
Description
Settings for 2.4-GHz and
2.8-GHz models
ID0
Off
ID1
Off
ID2
Off
HP ProLiant ML370 Generation 3 Server Maintenance and Service Guide
Settings for 3.06-GHz and
above models
Off
Off
On