Danfoss VLT Micro Drive Quick Manual page 18

Quick Guide
No Description
.
92 Parameter value exceeds the
min/max limits
nw Not While RUNning
run
Err. An incorrect password was
entered
1) These faults may be caused by line power distortions. Installing a Danfoss line filter may rectify this problem.
Table 1.12 Warnings and Alarms Code List
®
VLT Micro Drive Quick Guide
Warning Alarm Trip Error Cause of Problem
Lock
®
MG02B722 - VLT is a registered Danfoss trademark
X Occurs when trying to set a value outside the range.
X Parameter can only be changed when the motor is stopped.
X Occurs when using an incorrect password for changing a
password-protected parameter.
1 1
1-15