Power Supply LEDs
The following figure shows the Cisco ASR 1002-HX Router DC power supply.
Figure 19: ASR1000X-DC-950W DC Power Supply Used in the Cisco ASR 1002-HX Router
1
2
Power Supply LEDs
The following table describes the power supply LEDs.
Table 6: AC and DC Power Supply LEDs
Power Supply Condition
No AC power to all power supplies
Power Supply Failure (includes over voltage, over
current, over temperature and fan failure)
Power Supply Warning events where the power
supply continues to operate (high temperature, high
power and slow fan)
Cisco ASR 1001-HX Router and Cisco ASR 1002-HX Router Hardware Installation Guide
24
DC power connections
Handle
Supported Hardware Components
3
FAIL and OK LEDs
Retaining latch
Green (OK) LED Status
Amber (FAIL) LED Status
OFF
OFF
OFF
ON
OFF
1Hz Blinking