Supported Hardware Components - Cisco ASR 1001-HX Hardware Installation Manual

Supported Hardware Components

This chapter contains information about the supported hardware components on the Cisco ASR 1001-HX
Router and Cisco ASR 1002-HX Router, and contains the following sections:
•
•
•
•
•
Supported EPAs
The following table lists the supported EPAs on the Cisco ASR 1002-HX Router.
PID
EPA-18X1GE
EPA-10X10GE
Supported EPAs, page 15
Supported Transceivers, page 17
Supported Crypto Module, page 19
Supported DIMM Upgrade , page 20
Power Supplies, page 20
Cisco ASR 1001-HX Router and Cisco ASR 1002-HX Router Hardware Installation Guide
C H A P T E R
Description
Eighteen 1GE-ports that support small form-factor pluggable (SFP)
optical transceivers to provide network connectivity. Ports are numbered
0 – 17.
See Table 3: Supported SFP Transceivers, on page 18
transceivers.
Ten 10GE-ports that support small form-factor pluggable (SFP+) optical
transceivers to provide network connectivity. Ports are numbered 0 –
9.
See Table 4: Supported SFP+ Transceivers, on page 18
transceivers.
2
for supported
for supported
15