Cisco Asr 1001-Hx Router And Cisco Asr 1002-Hx Router Hardware Installation Guide - Cisco ASR 1001-HX Hardware Installation Manual

General Safety Warnings
Statement 1005—Circuit Breaker
Warning
This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that the
protective device is rated not greater than:
AC:
• 20 A U.S. maximum (ASR 1001-HX Router and ASR 1002-HX Router)
DC:
• 20 A U.S. maximum (ASR 1001-HX Router)
• 30 A U.S maximum (ASR 1002-HX Router)
Warning Statement 1045—Short-circuit Protection
This product requires short-circuit (overcurrent) protection to be provided as part of the building installation.
Install only in accordance with national and local wiring regulations.
Statement 1028—More Than One Power Supply
Warning
This unit might have more than one power supply connection. All connections must be removed to
de-energize the unit.
Warning Statement 1017—Restricted Area
This unit is intended for installation in restricted access areas. A restricted access area can be accessed
only through the use of a special tool, lock and key, or other means of security.
Statement 1019—Main Disconnecting Device
Warning
The plug-socket combination must be accessible at all times, because it serves as the main disconnecting
device.
Warning Statement 1086—Power Terminals, Replace Cover
Hazardous voltage or energy may be present on power terminals. Always replace cover when terminals
are not in service. Be sure uninsulated conductors are not accessible when covers is in place.
Statement 1025—Use Copper Conductors Only
Warning
Use copper conductors only.

Cisco ASR 1001-HX Router and Cisco ASR 1002-HX Router Hardware Installation Guide

32
Preparing Your Site for Installation