Viewing License Information - Cisco ASR 1001-HX Hardware Installation Manual

Viewing License Information

Field Name
License Type: RightToUse
Next reload license Level: adventerprise
Use the show running-config command or the show startup-config command to view the license-level
information. The following example displays sample output from the show running-config command:
Router# show running-config
.
.
.
license boot level adventerprise
.
.
.
Table 15: show running-config Command Output Description
Field Name
license boot level adventerprise
Viewing License Information
Use the show license udi command to determine the Universal Device Identifier (UDI) information of your
chassis. This may be required at the time of purchasing a new license.
The following example displays sample output from the show license udi command:
Router# show license udi
SlotID
--------------------------------------------------------------------------------
*
Use the show license all command to display all the applicable licenses in both Primary License Storage and
Built In License Storage.
Primary License Storage stores the currently purchased and installed licenses.
Note
Cisco ASR 1001-HX Router and Cisco ASR 1002-HX Router Hardware Installation Guide
96
PID SN
ASR1002-HX JAE1931098U
Description
Indicates the type of license that is used.
This example shows that the Right-to-Use license is
used, which means that the purchase of a license is
required.
Other license types could be: Permanent (purchased)
license or an Evaluation 60-day license.
Indicates the startup configuration definition that will
be used for the next reload instance.
Description
Indicates the current requested Cisco lOS license level
to boot.
UDI
ASR1002-HX:JAE1931098U
License Verification