Power Supply Leds - Cisco Catalyst 8500 Series Hardware Installation Manual

Overview
Note The direction of the airflow is different for the and the as shown by the arrows in the illustrations below.
The following figure shows the DC power supply.
Figure 4: DC (PWR-CH1-950WDCR) Power Supply
1
2

Power Supply LEDs

The following table describes the power supply LEDs.
Table 2: AC and DC Power Supply LEDs
Power Supply Condition
No AC power to all power supplies
Power Supply Failure (includes over voltage, over
current, over temperature and fan failure)
DC power connections 3
Handle 4
Green (OK) LED Status
OFF
OFF
Cisco Catalyst 8500 Series Edge Platforms Hardware Installation Guide
Power Supply LEDs
FAIL and OK LEDs
Retaining latch
Amber (FAIL) LED Status
OFF
ON
7