Power Up and Initial Configuration
Procedure
Step 1
Enter no when the following system message appears on the router:
--- System Configuration Dialog ---
Would you like to enter the initial configuration dialog? [yes/no]: no
Step 2
Press Return and continue with the manual configuration:
Several log messages are displayed.
Step 3
Press Return to bring up the
Step 4
Type enable to enter privileged EXEC mode:
Router> enable
Router#
Configuring the Router Hostname
The hostname is used in CLI prompts and default configuration filenames. If you do not configure the router
hostname, the router uses the factory-assigned default hostname Router.
Procedure
Step 1
Step 2
Step 3
Step 4
prompt.
Router>
Command or Action
enable
Example:
Router> enable
configure terminal
Example:
Router# configure terminal
hostname name
Example:
Router(config)# hostname myrouter
end
Example:
myrouter# end
Cisco ASR 1001-HX Router and Cisco ASR 1002-HX Router Hardware Installation Guide
Using the Cisco IOS-XE CLI—Manual Configuration
Purpose
Enables privileged EXEC mode.
Note
Enter your password if
prompted.
Enters global configuration mode.
Specifies or modifies the hostname for the
network server.
(Optional) Returns to privileged EXEC mode.
79