Power-Supply Module Leds - Cisco Rugged Series Installation Manual

Power-Supply Module LEDs

Figure 19: PWR-RGD-AC-DC Power-Supply Module
1 Power-supply module
2 PSU OK LED
Figure 20: PWR-RGD-LOW-DC Power-Supply Module
1 Power-supply module
2 PSU OK LED
For a description of the PSU OK LEDs, see
Power-Supply Module LEDs
The router power-supply module LEDs are labeled PSU1 and PSU2 (on the router) and PSU OK (on the
power-supply module). They show whether power-supply modules 1 and 2 are receiving power.
Table 6: Power Supply Module LEDs
Color
Off
Cisco Catalyst IR8340 Rugged Series Router Hardware Installation Guide
34
3 Captive screw
3 Captive screw
System Status
Power-supply module (1 or 2) is not installed.
Power-Supply Module LEDs, on page
Power Supply Installation
34.