Delete All Sctp Far Endpoints (Rc/V 33.21) - Lucent Technologies 5ESS Manual

Delete All SCTP Far Endpoints (RC/V 33.21)

....................................................................................................................................................................................................................................
Purpose
When to use
Related information
Admonishments
Before you begin
Procedure
....................................................................................................................................................................................................................................
6 - 3 8
SCTP Far Endpoint (RC/V 33.21) view is used to delete SCTP far
endpoints.
Use this procedure to delete all of the far SCTP endpoints.
Refer to 235-118-258, Recent Change Reference for information on
the RC/V system.
Refer to 235-080-100, Translations Guide, for information on Office
Records (output reports).
Refer to the 235-600-700/750, Input/Output Messages manuals for
additional information on the Input and Output commands.
None.
Required Tools
•
Supplemental Trunk Line Workstation (STLWS) or Recent
Change and Verify (RC/V) terminal
•
Access to RC/V Menu Interface
Required Material
•
®
The 5ESS
release or later with the SIP for Packet Trunking - NAR feature
software.
Required Information
•
All SCTP Far endpoint names
Required Conditions
•
All SCTP associations have been deleted on RC/V 33.22
............................................................................................................................................................
Dump the SCTPFEPD/5888 office records. At the MCC or STLWS
1
type and enter the command:
OP:OFR:FORM=5888
Result:
OP OFR FORM=5888 PF is printed followed by a printout
of the SCTPFEPD/5888 office records.
Lucent Technologies
switch must be running a 5E16.2 FR3 software
Deprovisioning
235-200-118
Issue 3.02B, March 2007