Analyze Service Selection Change Report - Lucent Technologies 5ESS Manual

Analyze Service Selection Change Report

....................................................................................................................................................................................................................................
Purpose
When to use
Related information
Admonishments
Before you begin
Procedure
....................................................................................................................................................................................................................................
235-200-118
Issue 3.02B, March 2007
This procedure provides an analysis of the service selection change
report which is a result of an automatic or manual action of a
processor group changing its service selection.
Use this procedure when a service selection change report is
generated.
Refer to the Input Messages Manual, 235-600-700, and the Output
Messages Manual, 235-600-750, for additional information.
None
Required Tools
•
Use of the Master Control Center (MCC) or Supplementary
Trunk Line Workstation (STLWS).
Required Material
•
The switch must be running a 5E16.2 FR3 software release or
later with the SIP for Packet Trunking feature software.
Required Information
•
None required.
Required Conditions
•
None required.
............................................................................................................................................................
REPT SERV PCRGRP
Analyze the
1
REPT SERV PCRGRP=a-b
PSUPH=a-c-d-e f g
Where:
a = Global switch module number
b = Processor group number
c = Packet switch unit 2 number
d = PSU2 shelf number
e = PH position number
Lucent Technologies
Maintenance Considerations
change report generated:
7 - 8 5