Add New Sctp Near Endpoint - Lucent Technologies 5ESS Manual

Add New SCTP Near Endpoint

....................................................................................................................................................................................................................................
Purpose
When to use
Related information
Admonishments
Before you begin
Procedure
....................................................................................................................................................................................................................................
235-200-118
Issue 3.02B, March 2007
This procedure defines the steps for adding a new SCTP near
endpoint.
Use this procedure to add a new SCTP near endpoint.
Refer to 235-118-258, Recent Change Reference, for information on
the RC/V system.
Refer to 235-080-100, Translations Guide, for information on Office
Records (output reports).
Refer to the 235-600-700/750, Input/Output Messages manuals for
additional information on the Input and Output commands.
None.
Required Tools
•
Supplemental Trunk Line Workstation (STLWS) or Recent
Change and Verify (RC/V) terminal
•
Access to RC/V Menu Interface
Required Material
•
®
The 5ESS
release with the SIP for Packet Trunking - NAR feature software.
Required Information
•
IP Addresses of adjacent routers
Required Conditions
•
None
............................................................................................................................................................
Examine the PCRGRP/5883 and SCTPNEPD/5886 office records to
1
identify a processor group that does not have an SCTP near endpoint
assigned to it or execute the
Group on an Existing SIP GSM" (5-95)
Lucent Technologies
switch must be running a 5E16.2 FR3 software
"Add New SIPT PHE2 IP Processor
Provisioning
procedure.
5 - 9 9