Assign Ph Channel Group As Ip Processor (Rc/V 33.1) - Lucent Technologies 5ESS Manual

Assign PH Channel Group as IP Processor (RC/V 33.1)

....................................................................................................................................................................................................................................
Purpose
When to use
Related information
Admonishments
Before you begin
Procedure
....................................................................................................................................................................................................................................
5 - 3 4
The Internet Protocol (IP) Processor Assignment view (RC/V 33.1)
assigns IP addresses and parameters to a processor (PHE2).
Use this procedure to define IP parameters on a processor.
Repeat individual steps of this procedure as required.
Refer to 235-118-258, Recent Change Reference, for information on
the RC/V system.
None.
Required Tools
•
Supplemental Trunk Line Workstation (STLWS) or Recent
Change and Verify (RC/V) terminal
•
Access to RC/V Menu Interface
Required Material
•
®
The 5ESS
release with the SIP for Packet Trunking - NAR feature software.
Required Information
•
Processor ID
•
Processor type
•
Shelf number
•
Channel Group number
•
Local IP address
•
IP subnet mask
Required Conditions
•
Protocol Handler is defined (RC/V 22.4)
•
Channel Group is defined (RC/V 22.16)
............................................................................................................................................................
Select and prepare terminal for RC/V activities.
1
Reference:
"Select and Prepare Terminal" (5-11)
Lucent Technologies
switch must be running a 5E16.2 FR3 software
Provisioning
235-200-118
Issue 3.02B, March 2007