Power Supply; Specified Power Supply; Installing The Battery And The Belt Strap - Star SM-S401 Hardware Manual

2.4. Power Supply

2.4.1. Specified Battery Charger
OUTPUT : DC 8.4 V/0.8 A (CC-CV)
2.4.2. Installing the Battery
Cautions :
1) Before installing or removing the battery pack, ensure the printer is OFF.
2) If the printer is not used for long period of time, remove the battery pack
from the printer.
1. To install battery pack, proceed as follows:
- Insert the battery pack in the direction of the arrow.
2. Removing the Battery Pack
- Turn the printer power off and push the battery pack lock and lift up the
direction of the arrow.
3. The battery pack install into the battery holder.
- Insert the battery pack in the direction of the arrow.
Battery Pack Lock
- 10 -
PUSH