Configuring Member Ports For A Smart Link Group - HP 5130 EI Series Configuration Manual

High availability
Hide thumbs Also See for 5130 EI Series:
Table of Contents

Advertisement

Step
1.
Enter system view.
2.
Enter MST region view.
3.
Configure the
VLAN-to-instance mapping
table.
4.
Manually activate MST region
configuration.
5.
(Optional.) Display the
currently activated
configuration information of
the MST region.
6.
Return to system view.
7.
Create a smart link group and
enter smart link group view.
8.
Configure protected VLANs
for the smart link group.

Configuring member ports for a smart link group

You can configure member ports for a smart link group either in smart link group view or in interface view.
The configurations made in these two views have the same effect.
In smart link group view
To configure member ports for a smart link group in smart link group view:
Step
1.
Enter system view.
2.
Create a smart link group and
enter smart link group view.
3.
Configure member ports for a
smart link group.
In interface view
To configure member ports for a smart link group in interface view:
Command
system-view
stp region-configuration
Method 1:
instance instance-id vlan
vlan-list
Method 2:
vlan-mapping modulo
modulo
active region-configuration
display stp region-configuration
quit
smart-link group group-id
protected-vlan reference-instance
instance-id-list
Command
system-view
smart-link group group-id
port interface-type interface-number
{ primary | secondary }
97
Remarks
N/A
For more information about the
command, see Layer 2—LAN
Switching Command Reference.
All VLANs in an MST region are
mapped to CIST (MSTI 0) by default.
For more information about the
commands, see Layer 2—LAN
Switching Command Reference.
For more information about the
command, see Layer 2—LAN
Switching Command Reference.
Available in any view.
The output of the command includes
VLAN-to-instance mappings.
For more information about the
command, see Layer 2—LAN
Switching Command Reference.
N/A
N/A
By default, no protected VLAN is
configured for a smart link group.
Remarks
N/A
N/A
By default, no member port is
configured for a smart link
group.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents