HP 5130 EI Series Configuration Manual page 37

# Test the two-way frame delay from MEP 1001 to MEP 4002 in service instance 1 on Device A.
[DeviceA] cfd dm two-way service-instance 1 mep 1001 target-mep 4002
Frame delay:
Reply from 0010-fc00-6514: 10ms
Reply from 0010-fc00-6514: 9ms
Reply from 0010-fc00-6514: 11ms
Reply from 0010-fc00-6514: 5ms
Reply from 0010-fc00-6514: 5ms
Average: 8ms
Sent DMMs: 5
Frame delay variation: 5ms 4ms 6ms 0ms 0ms
Average: 3ms
6. Verify the TST function after the CC function obtains the status information for the entire network:
# Test the bit errors on the link from MEP 1001 to MEP 4002 in service instance 1 on Device A.
[DeviceA] cfd tst service-instance 1 mep 1001 target-mep 4002
5 TSTs have been sent. Please check the result on the remote device.
# Display the TST result on MEP 4002 in service instance 1 on Device D.
[DeviceD] display cfd tst service-instance 1 mep 4002
Service instance: 1
MEP ID: 4002
Sent TST total number: 0
Received TST total number: 5
Received from 0010-fc00-6511, Bit True,
Received from 0010-fc00-6511, Bit True,
Received from 0010-fc00-6511, Bit True,
Received from 0010-fc00-6511, Bit True,
Received from 0010-fc00-6511, Bit True,
Received: 5
31
Lost: 0
sequence number 0
sequence number 1
sequence number 2
sequence number 3
sequence number 4