Configuring Errored Frame Event Detection - HP 5130 EI Series Configuration Manual

To configure errored symbol event detection globally:
Step
1. Enter system view.
2. Configure the errored symbol
event detection window.
3. Configure the errored symbol
event triggering threshold.
To configure errored symbol event detection on a port:
Step
1. Enter system view.
2. Enter Layer 2 Ethernet port
view.
3. Configure the errored symbol
event detection window.
4. Configure the errored symbol
event triggering threshold.

Configuring errored frame event detection

An errored frame event occurs when the number of times that error frames in the detection window
(specified detection interval) are detected exceeds the predefined threshold.
You can configure this command in system view or port view. The configuration in system view takes effect
on all ports, and the configuration in port view takes effect on the specified port. For a port, the
configuration in port view takes precedence.
To configure errored frame event detection globally:
Step
1. Enter system view.
2. Configure the errored frame
event detection window.
3. Configure the errored frame
event triggering threshold.
To configure errored frame event detection on a port:
Step
1. Enter system view.
2. Enter Layer 2 Ethernet port
view.
Command
system-view
oam global errored-symbol-period
window window-value
oam global errored-symbol-period
threshold threshold-value
Command
system-view
interface interface-type
interface-number
oam errored-symbol-period
window window-value
oam errored-symbol-period
threshold threshold-value
Command
system-view
oam global errored-frame window
window-value
oam global errored-frame
threshold threshold-value
Command
system-view
interface interface-type
interface-number
6
Remarks
N/A
By default, the errored symbol
event detection window is
100000000.
By default, the errored symbol
event triggering threshold is 1.
Remarks
N/A
N/A
By default, an interface uses the
value configured globally.
By default, an interface uses the
value configured globally.
Remarks
N/A
By default, the errored frame event
detection window is 1000
milliseconds.
By default, the errored frame event
triggering threshold is 1.
Remarks
N/A
N/A