Information About Sd Memory Cards - Leica DMS1000 User Manual

Information About SD Memory Cards

General notes
Be absolutely certain to read the follow-
ing instructions about formatting and
handling the memory card provided in order to
prevent malfunctions during image acquisition.
File system and formatting
The FAT file system has to be used so that the
SD card works correctly and is detected by the
Leica DMS1000. Most memory cards are factory-
formatted with FAT so that they can be used
immediately.
An SD card cannot be formatted in the
Leica DMS1000. If it is necessary to format the
card, use a computer to do so. You can also
delete the files on the card in any digital camera
that works with SD cards. During the deletion,
the FAT file system is installed automatically.
Leica DMS1000 User Manual
Write protection
Some SD memory cards are equipped
with a slide for write protection. If the
slide is pressed down, no new images can be
saved. In addition, existing images are protected
from being deleted.
If you cannot save any more images to the
SD card, check to make certain that the write
protection is disabled.
Operation
Orientation
Make sure that the memory card is
oriented correctly before inserting it into
the Leica DMS1000. Accidentally inserting the
card the wrong way around could damage the
microscope.
Capacity
Class 4 and 6 SD cards can be used with the
Leica DMS1000. SDHC (high capacity) cards up
to 32 GB are also supported.
49