Vega VEGABAR 17 Operating Instructions Manual page 27

Ʋ additional
Ʋ with cooling element
Ʋ Measuring ranges from 400 bar, front-
flush process fitting
Shock resistance
Ʋ Version with terminal housing
Ʋ Version with plug connector or cable
outlet
Vibration resistance
Ʋ Version with terminal housing or cool-
ing element
Ʋ Version with plug connector or cable
outlet
Electromechanical data
Angled plug connector
Ʋ Version
Ʋ Cable gland
Ʋ Screw terminals for cable cross-
section up to
Round plug connector
Ʋ Version
Cable outlet
Ʋ Diameter approx.
Terminal housing
Ʋ Cable gland
Ʋ Spring-loaded terminals for wire
cross-section up to
Voltage supply
Operating voltage U
B
Ʋ Version with plug or cable outlet
Ʋ Version with terminal housing
Power consumption approx.
Load resistor
Ʋ Version with plug or cable outlet
Ʋ Version with terminal housing
Ʋ Example - U = 24 V DC
B
Electrical protective measures
Protection rating
7)
Ʋ with angled plug connector
According to EN 60529/IEC 529.
7)
VEGABAR 17 •
-30 ... +125 °C (-22 ... +257 °F)
-20 ... +150 °C (-4 ... +302 °F)
-30 ... +70 °C (-22 ... +158 °F)
600 g according to IEC 60068-2-27 (mechanical shock)
1000 g according to IEC 60068-2-27 (mechanical shock)
10 g according to IEC 60068-2-6 (resonance vibration)
20 g according to IEC 60068-2-6 (vibration at reso-
nance)
4-pin according to ISO 4400
PG9 (for cable: ø 4.5 ... 7 mm)
1.5 mm² (AWG 15)
4-pole M12 x 1
6 mm
PG13.5 (for cable: ø 7 ... 13 mm)
2.5 mm² (AWG 14)
10 ... 30 V DC
11 ... 30 V DC
1 W
≤ (U - 10 V)/0.02 A- (cable length in m x 0.14 Ω)
B
≤ (U -11 V)/0.02 A
B
(24 V - 10 V)/0.022 A = 636 Ω
IP 65
9 Supplement
27