Advantech SIMB-U01 User Manual page 47

3.2.1.1 Date [Day, xx/xx/xxxx]
The date format is <week>, <month>, <day>, <year>.
3.2.1.2 Time [xx:xx:xx]
The time format is <hour> <minute> <second>, based on the 24-hour clock.
3.2.1.3 IDE Channel 0/1/2/3/4 Master / Slave
IDE HDD Auto-Detection
[Press Enter] to select this option for automatic device detection.
IDE Device Setup
[Auto]: Automatically detects IDE devices during POST
[None]: Select this when no IDE device is used. The system will skip the auto-
detection setup to make system start up faster.
[Manual]: User can manually input the correct settings.
– Access Mode: The options are CHS/LBA/Large/Auto
– Capacity: Capacity of currently installed hard disk
– Cylinder: Number of cylinders
– Head: Number of heads
– Precomp: Write precomp
– Landing Zone: Landing zone
– Sector: Number of sectors
3.2.1.4 Driver A/B
Specifies the capacity and physic al size of diskette drive A/B. Do not select [None] if
you are using a floppy disk drive. Configuration options: [None] [360K, 5.25 in.]
[1.2M, 5.25 in.] [720K, 3.5 in.] [1.44M, 3.5 in.] [2.88M, 3.5 in.]
3.2.1.5 Video
This category detects the type of adapter used for the primary monitor that must
match your video display card and monitor.
EGA / VGA: Enhanced Graphics Adapter/Video Graphics Array. For EGA, VGA,
SVGA, or PGA monitor adapters.
CGA 40: Color Graphics Adapter, power up in 40 column mode.
CGA 80: Color Graphics Adapter, power up in 80 column mode.
MONO: Monochrome adapter includes high resolution monochrome adapters.
3.2.1.6 Halt On
Set the system to halt on errors according to the system functions specified in each
option. Configuration options: [All Errors] [No Errors] [All, But Keyboard] [All, But Dis-
kette] [All, But Disk/Key]
3.2.1.7 Memory
This category displays base memory, extended memory, and total memory detected
during POST (Power On Self Test).
41 SIMB-U01 User Manual