Advantech SIMB-U01 User Manual page 61

3.2.6.10 Suspend Mode
Item
Min. Power Saving
Max. Power Saving
User Defined
3.2.6.11 HDD Power Down
Select "1-15 mins" to enable HDD Power Down mode between 1 to 15 mins. Select
"Disabled" to disable HDD Power Down function.
3.2.6.12 Soft-off by PWR-BTTN
If you choose "Instant-Off", then pushing the ATX soft power switch button once will
switch the system to "system off" power mode. You can choose "Delay 4 sec". If you
do, then pushing the button for more than 4 seconds will turn off the system, whereas
pushing the button momentarily (for less than 4 seconds) will switch the system to
"suspend" mode.
3.2.6.13 Wake-Up by PCI card
The choices are "Enabled" and "Disabled".
3.2.6.14 Power On by Ring
Select "Enabled" to power on the system from a soft off state by an input signal on
the serial Ring Indicator (RI) line. The choices are "Enabled" and "Disabled".
3.2.6.15 USB KB Wake-Up from S3
When "Enabled", enter any key to wake up the system from S3 state. The choices
are "Enabled" and "Disabled".
3.2.6.16 Resume by Alarm
When "Enabled", set the date and time at which the RTC (real-time clock) alarm
awakens the system from suspend mode. The choices are "Enabled" and "Disabled".
3.2.6.17 Primary / Secondary IDE
The options: Disabled, Enabled.
3.2.6.18 FDD, COM, LPT Port
The options: Disabled, Enabled.
3.2.6.19 PCI PIRQ [A-D] #
The options: Disabled, Enabled.
3.2.6.20 HPET Support
The options: Disabled, Enabled.
3.2.6.21 HPET Mode
The default is 32-bit mode.
Description
Minimum power management, HDD Power Down = 15 Min,
Maximum power management, HDD Power Down =1 Min
Allows you to set each mode individually. When not disabled, each
of the ranges are from 1 min. to 1 hr. except for HDD Power Down
which ranges from 1 min. to 15 min. and disable.
55 SIMB-U01 User Manual