Advantech SIMB-U01 User Manual page 56

SATA Mode
The default setting is "IDE" which sets the SATA controller to IDE mode. The
"RAID" setting sets the SATA controller to RAID mode. The Advanced Host
Controller Interface (AHCI) is a hardware mechanism that allows software to
communicate with SATA devices, such as hot-plugging and Native Command
Queuing (NCQ).
LEGACY Mode Support
The choices: Disabled, Enabled.
3.2.4.2 Onboard Device
Azalia Controller
The choices: Auto, Disabled.
Audio Amplifier
The choices: Enabled, Disabled.
Amplifier Gain (dB)
The choices: 31.8dB, 27.2dB, 21.2dB, 15.3dB
3.2.4.3 Super I/O Device
Power ON Function
This feature allows you to wake up the system using any of the listed options.
The selections are "Hot KEY", "Mouse Left", "Mouse Right", "Any KEY" and
"BUTTON ONLY".
KB Power ON Password
Select this item to set or change the KB power on password.
Hot Key Power ON
Awaken the system by pressing the hot key button. The choices are "Ctrl-F1",
"Ctrl-F2", "Ctrl-F3" to "Ctrl-F8".
SIMB-U01 User Manual 50