HIOS HM-10 Operation Manual page 9

14. For aggregation of measurement data, turn the mode switch to PEAK.
For measurement, an input signal (torque = load) of 15 digits or larger is required. If you press the
Reset button, the data will be output and the value in the display window will be cancelled. (For the
data output tool, refer to the description on page 16.)
● About "digit"
"digit" means the unit of a value to be displayed regardless of the decimal point.
(Examples) .0.01 = 1 digit
.025 = 25 digits
.10 = 10 digits
1.25 = 125 digits
- 8 -