Display Unit - HIOS HM-10 Operation Manual

■ Parts Name

Display unit

Printer Output
connector
Buzzer Set
Display Panel
Power
Switch
Reset
Button
Zero Adjustment Knob
Side of the detector:
(Serial No. sticker is attached.)
● Mode Switch
TRACK: The value on the display changes as the load to the detector changes.
(The value will disappear when no load is applied.)
PEAK: The maximum value of load is captured. (The value will disappear when you press the reset
button.)
● Buzzer Set
The buzzer will start sounding when the torque reaches the specified torque.
● Display panel (unit):
Model N ・ m
HM-100 0.00
HM-10 .000
Analog Output Connect for
Connector Charger
Mode Switch
PERK←→TRACK
Socket
● Conversion of N ・ m: 1N ・ m ≒ 10.2 kgf ・ cm
N ・ cm
0
0.0
Display unit (back)
(Serial No. sticker is attached.)
Unit Converter Switch
Lbf・in←→kgf・cm←→N・m
Connectors
・There are two connectors.
・One is covered with a cap for protection.
N ・ m
10
1
9.81
0.981
- 3 -
Cable
DPC-0506, 1.7m
(The same shape at
both ends)
DETECTOR
N ・ cm kgf ・ cm
1000
100
981
98.1
102
10.2
100
10