HIOS HM-10 Operation Manual page 5

■ Items included with the torque meter
● Both the main unit and accessories are packed in a dedicated aluminum attaché case
Model Fidaptor
P/N:
TEM 26-Z
HM-10
Yellow spring
1 piece
P/N:
TEM40-Z
HM-100
Black spring
1 piece
● Fidaptor list
Model
P/N
Measurement range
(N ・ m)
Supporting bit No.
Head screw diameter
■ About Fidaptor (accessories)
Use Fidaptor for torque measurement of the screwdriver for an automatically controlled system.
For #1 bit For
HM-10 HM-100
P/N TFM 26-Z P/N TMF 40-Z
Fidaptor
Screw for head
replacementa
5 pieces of Phillips head
pan screws, M2.6 x 6mm
2 pieces of hollow set
screws, M3 x 6mm
5 pieces of Phillips head
pan screws, M4.0 x 8mm
2 pieces of hollow set
screws, M4.0 x 6mm
Standard accessory
TFM 26-Z
0.15-0.6
(Yellow spring)
+#1
M2.6
(P/N: SPP26×060SUS)
#2 bit
● Replacement of the head screw (preferably replace it within 10
operation cycles.)
Use the attached L-wrench to loosen the hollow set screws (M3)
before the head shape collapses.
Use L-wrench to lock the rotation
and unfasten the screw.
Fidaptor
Charger
spring
-
AC100V
P/N
Measurement
TCH-100N
range:
1 piece
0.15-0.6 N ･ m
Yellow spring
1 piece
HM-10
Optional accessory
(separately sold)
TFM 20-Z
0.25 or smaller
(Red spring)
+#0
M2.6
(P/N: SPC26×060)
(Note)
When the screw head on the threaded shaft
wears, measurement results vary. Please
replace it as soon as possible.
Use the L-wrench to lock the rotation of the hollow
set screw and unfasten the head screw.
Suitable wrench size: 1.5mm for HM-10, 2.0mm for
HM-100. Spare screws are included.
- 4 -
L-shaped Others
wrench 1 piece each
Opposite side
dis.:
・ Cord for
1.5mm
detector
1 piece
P/N: DPC-
0506
Opposite side
dis.
・ Inspection
1.5mm,
report
2.0mm
1 piece each
HM-100
Standard accessory
TFM 40-Z
0.5-3
(Black spring)
+#2
M4.0
(P/N: SPP40×080SUS)