Select Control Mode; Set Your Personal Schedule - Danfoss ECL Comfort 110 Operating Manual

Daily use
Push to exit 'Temperature overview'.
If the temperature value is displayed as
"- -" the sensor in question is not connected.
"- - -" the sensor is short-circuited.

Select control mode

During scheduled operation (AUTO), the symbols will show you the control mode.
Mode COMFORT<
Wednesday
Change the mode (AUTO, COMFORT, SAVING, or STANDBY).

Set your personal schedule

It is only possible to set the personal schedules if the ECL Comfort 110 controller has a built-in
ECA 110 timer program.
Wednesday
04-01-12 8:32
This display will show the current day and time.
Choose the day for which you wish to change the settings.
VI.LV.A1.02
<
© Danfoss | 2016.05 | 9