Danfoss ECL Comfort 110 Operating Manual page 2

How to navigate?
What do the symbols mean?
1000
Temp. 10.4@½
Mode COMFORT<
The desired flow temperature is influenced by for example return temperature.
The actuator closes the control valve.
The actuator opens the control valve.
The actuator does not activate the valve.
The circulation pump is ON.
The circulation pump is OFF.
The controller is in saving mode.
The controller is in comfort mode.
Safety Note
To avoid injury of persons and damages to the device, it is absolutely necessary to read and
observe these instructions carefully. The warning sign is used to emphasize special conditions
that should be taken into consideration.
This symbol indicates that this particular piece of information should be read with
special attention.
2 | © Danfoss | 2016.05
Adjust temperatures and values.
Switch between menu lines.
Select / return.
2 sec.
Return to daily user menu.
VI.LV.A1.02