Danfoss ECL Comfort 110 Operating Manual page 10

Daily use
Today's schedule
The first display will show you the start of the first comfort period ('Start1'). See or change
the start of this period.
The first bar will blink.
See or change the end ('Stop1') of the first comfort period.
The next bar will blink.
See or change the start ('Start2') of the next comfort period.
See or change the next start / stop periods, if necessary.
The schedule has always two comfort periods a day. The start and stop times can be set in
half-hourly intervals (30 min.).
To arrange only one comfort period on a day: Set Start2 and Stop2 times to the same time
value.
10 | © Danfoss | 2016.05
Start1 09:00
Wed ]]]][!]]]!!]
Stop1 12:00
Wed ]]]][!{]]!!]
Start2 18:00
Wed ]]]][!{]]!!]
Stop2 22:00
Wed ]]]][!{]]!!]
VI.LV.A1.02