Power Management; Regulatory Information; Regulatory Agency Approvals - 3M C3266PW User Manual

Multi-touch projected capacitive touch (pct) chassis
Hide thumbs Also See for C3266PW:
Table of Contents

Advertisement

3M™ Multi-Touch Chassis Display User Guide
Common Installation
Issues
Touch sensor does not respond
to touch
Touch sensor is not accurate
Cursor does not follow finger
movement or does not reach the
edges of the sensor
Cursor is not located directly
underneath your finger

Power Management

The 3M Multi-Touch Chassis Display conforms to the Video Electronics Standards
Association (VESA) Display Power Management Signaling (DPMS) standard. To benefit
from power management, the display must be used in conjunction with a computer and
video card that implements the VESA DPMS standard.
The PC automatically invokes the power management feature if you do not use the touch
sensor, mouse, or keyboard for a user-defined period. To restore the video image, simply
touch the sensor, press a key, or move the mouse. To set the period of time after which
the PC will invoke the power management feature, refer to the user manual that came
with your PC. The touch sensor will remain on throughout this sequence.
Chapter 4

Regulatory Information

Regulatory Agency Approvals

Your product complies with the following regulatory standards:
 FCC-B
 CE
 RCM (Australia/New Zealand)
 ICES Class B (Canada)
Possible Solutions
 Review the installation procedures. Are all cables connected properly?
 After you installed Touch Software, did you restart your PC to activate
the touch sensor driver?
 Remove the touch sensor communications cable and plug it back in.
 Disconnect the power cable and plug it back in.
 Calibrate the touch sensor for the current video resolution and
operating system. Refer to Chapter 2 in document 25695 for additional
information.
 Calibrate the touch sensor for the current video resolution and
operating system. Refer to Chapter 2 in document 25695 for additional
information.
 Open the touch sensor control panel and make sure all cursor offsets
(vertical, edge/horizontal) are turned off.
 Calibrate the touch sensor for the current video resolution and
operating system.
3M Touch Systems, Inc. Proprietary Information
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

C6587pwC4667pwC4267pwC5567pw

Table of Contents