On Screen Display; Menu Navigation - 3M C3266PW User Manual

14

On Screen Display

Your 3M Multi-Touch Chassis Display has seven controls for adjusting the video display.
POWER SOURCE
Power -- Turns the display on and off.
Source -- Selects the applicable input source: VGA, HDMI, Display port, or DVI. Settings are saved
automatically.
Up -- Press to move among the menus and from the menu selection to specific choices.
Down -- Press to move among the menus and from the menu selection to specific choices.
+
(plus sign) – Press to increase the volume.
- (minus sign) -- Press to decrease the volume.
Menu -- Shows or hides the onscreen display menu and acts as the Select key when scrolling through
menu options. Refer to Menu Navigation below for additional information.
If you do not press any buttons, the display adjustment program times out (adjustable up
to 30 seconds) and hides the menu options. Press the Menu button at any time to display
the options again.
Pressing Menu will pull up the On Screen Display (OSD) menus to control the Picture,
Color, Display, OSD Settings, and Setup, as shown below.

Menu Navigation

To adjust the On-Screen Display:
UP
1. Select the Menu button to bring up the on-screen display (OSD)
2. Use the Up and Down buttons to scroll through the various Menu choices:
 Image Menu
 Display Menu
 Audio Menu

Setup Menu
3. Once the Menu you want is highlighted, hit the Menu button again to select
that Menu.
4. Use the Up and Down buttons to scroll through the various Menu options.
For example, once you have chosen the Picture Menu, use the Up/Down
buttons to select either Brightness, Contrast, or Sharpness.
5. Once the option you want is highlighted, hit the Menu button again to select
that option.
6. Use the Up and Down buttons to increase or decrease the value of the option.
7. Your selection will be automatically saved.
3M Touch Systems, Inc. Proprietary Information
3M™ Multi-Touch Chassis Display User Guide
+
DOWN
-
MENU