Access To The Video Controls; Clearance And Ventilation; Video Card Requirements; Using The Standard Controls For The Video Card - 3M C3266PW User Manual

12

Access to the Video Controls

The 3M Multi-Touch Chassis Display has seven buttons located on the side of the display
for the on-screen menu and adjusting the video display. Make sure you will be able to
access the video controls once the 3M Multi-Touch Chassis Display is installed.
If space is tight and access is important, an on screen display remote control (Part No. 98-
1100-0330-2) is an option (C4267PW, C4667PW, C5567PW, C6587PW only).

Clearance and Ventilation

Leave at least two inches of clearance space behind the 3M Multi-Touch Chassis Display
for proper ventilation. Units have vent holes at the top and bottom on the back of the
chassis -- ensure these holes are not blocked during installation. Always maintain
adequate ventilation to protect the display from overheating and to ensure reliable and
continued operation.
Note: Be sure to leave at least 2 inches clearance around fan inputs.
Refer to the published specifications for the maximum and minimum operating
temperature and humidity conditions. Refer to the product data sheet on the 3M Touch
Systems website at http://www.3m.com/touch/.

Video Card Requirements

Confirm your computer has a video card that supports the native video resolution of 1920
x 1080 for the 3M Multi-Touch Chassis Display. Mention something about the C65 being
4K and that you will need to be able to drive higher resolution

Using the Standard Controls for the Video Card

In addition to the standard controls on the display, each video card has several controls
that let you adjust the display settings. The software and driver for each video card is
unique. In most cases, you adjust these settings by using a program or utility provided by
the manufacturer of the video card.
3M Touch Systems, Inc. Proprietary Information
3M™ Multi-Touch Chassis Display User Guide