Mitsubishi Electric FX3U-ENET-ADP User Manual page 95

FX -ENET-ADP User's Manual
3U
Setting
Subnet Mask Pattern
Default Router IP Address
Communication Data Code
Disable direct connection to
MELSOFT
Do not respond to search for
CPU on network
Open Setting
Time Setting
Log Record Setting
*1. Set the IP address, subnet mask pattern and default router IP address upon consulting a network
administrator.
Specify the subnet mask pattern.
[Setting range]
*1
• 192.0.0.0 to 255.255.255.252 (Decimal)
• C0.00.00.00 to FF.FF.FF.FC (Hexadecimal)
Specify the IP address of the default router when it is used.
[Setting range]
*1
• 0.0.0.1 to 223.255.255.254 (Decimal)
• 00.00.00.01 to DF.FF.FF.FE (Hexadecimal)
Select the data code used for communication using the MC protocol.
• Binary Code
Communicates by binary code.
• ASCII Code
Communicates by ASCII code.
Select whether or not direct connection to MELSOFT is disabled.
Select whether or not response is given to search for CPU on the network.
A click of the button will display "Ethernet Adapter Open Setting" screen.
For details, refer to Section 8.2.
A click of the button will display "Ethernet Adapter Time Setting" screen.
For details, refer to Section 8.3.
A click of the button will display "Ethernet Adapter Log Record Setting" screen.
For details, refer to Section 8.4.
8 The Operation of GX Works2
8.1 Ethernet adapter Setting
Description
1
2
3
4
5
6
7
8
9
A
89