Mitsubishi Electric FX3U-ENET-ADP User Manual page 101

FX -ENET-ADP User's Manual
3U
1) Transfer Setup screen
When connecting the FX PLC using the Ethernet adapter, set the following contents on the "Transfer
Setup Connection" screen.
a) PC side I/F
"Ethernet Board" is chosen.
b) PLC side I/F
Double-click "PLC Module" to open the "PLC side I/F Detailed Setting of PLC Module" screen, and set
details of the connection route. For description, refer to "2)" of following page.
c) Other Station Setting
Double-click "No Specification", and set the "Check at Communication Time" and "Retry Times".
8 The Operation of GX Works2
8.5 Online Function
95
1
2
3
4
5
6
7
8
9
A