2.
Wash the liquid material vat.
A
Loosen the liquid material vat retaining screws.
B
Pull up the liquid material vat stopper.
The liquid material vat pops out toward you slightly.
C
Remove the liquid material vat.
M EM O
• Wash the printing platform before removing the liquid material vat (P. 36 "1. Wash the printing platform.").
If the liquid material vat is removed first, resin stuck to the printing platform may fall off and dirty the
machine.
• When removing the liquid material vat, take care not to spill any remaining resin on the machine.
3. Printing
Chapter 2 Output
39