2. Create the Print File in Quick Denta
C
Click [Input] or [Open].
[Import] button
•
Use this when importing STL or Quick Denta format files.
•
You can select multiple files at the same time.
•
If a file has already been imported and you use this button to import a different file,
you can add an object to the open file.
•
If you have imported a Quick Denta format file, the parameters set with Quick Denta
(such as the layer thickness) will not be included.
[Open] button
•
Use this when importing Quick Denta format files. This button cannot be used to
import STL format files.
•
The parameters set with Quick Denta (such as the layer thickness) will be included.
•
If a file has already been imported and you use this button to import a different file, a
new project file will be created.
D
Select the file to use, and then click "Open."
Imported files are displayed in the main view as an object.
24
Chapter 2 Output